Categories
Categories
Rapid Repair
by on June 22, 2023
41 views

iPhone screen replacements can be a tricky job. If you want to understand how it works we have jotted down some steps that usually are followed while undertaking one such procedure for an iPhone. In this article we will learn about that in detail. The process of iPhone screen replacement can vary depending on the model and whether you choose to do it yourself or take it to a professional repair service.

Here is a general overview of the steps involved:

1. Gather the necessary tools: If you're doing the replacement yourself, you'll need tools like a pentalobe or Phillips screwdriver, a suction cup, tweezers, and a plastic sponger or opening tool. You can purchase specialized iPhone Repair kits that include these tools.

2. Power off the iPhone: Make sure your iPhone is powered off before starting the repair process.

3. Remove the screws: Depending on the iPhone model, you may need to remove one or more screws located near the charging port or on the bottom edge of the device. Use the appropriate screwdriver to remove them.

4. Separate the display assembly: Place a suction cup near the home button (or on the lower part of the screen, if your iPhone doesn't have a home button) and gently pull upward. This will create a small gap. Insert a plastic sponger or opening tool into the gap and gently pry up to separate the display assembly from the rest of the device.

5. Disconnect the cables: Once the display assembly is partially separated, you'll see a metal shield covering the display cables. Remove the screws holding the shield in place and then lift it off. Next, disconnect the cables by carefully prying them up with a sponger or your fingers. These cables include the display, digitizer, and touch ID cables.

6. Remove the old screen: With the cables disconnected, you can lift the display assembly off the rest of the device. Be cautious not to damage any other components or cables during this step.

7. Install the new screen: Take your new replacement screen and carefully align it with the device. Gently press it down to ensure a secure fit.

8. Reconnect the cables: Connect the display, digitizer, and touch ID cables back into their respective ports. Place the metal shield back over the cables and secure it with the screws.

9. Reassemble the iPhone: Lower the display assembly onto the device and ensure it is aligned properly. Apply gentle pressure to ensure it snaps into place.

10. Replace the screws: Use the appropriate screwdriver to replace the screws you removed earlier.

11. Power on the iPhone: Press and hold the power button until the Apple logo appears on the screen. If the iPhone powers on successfully and the new screen works properly, the replacement process is complete.

It's important to note that the above steps are a general overview, and the specific process may vary depending on the iPhone model and any additional complexities involved. If you're unsure about performing the replacement yourself, it's always a good idea to seek professional assistance from an authorized repair service or an experienced technician.

Cost of iPhone Screen Replacement In India

The cost of iPhone screen replacement in India can vary depending on the model of the iPhone and the location where you get the repair done. Additionally, prices can change over time, so it's always best to check with authorized service centers or repair shops for the most up-to-date pricing. Here are some general price ranges for iPhone screen replacements in India as of my knowledge cutoff in September 2021:

1. iPhone SE (2nd generation): Approximately ₹6,000 to ₹8,000.

2. iPhone 6, iPhone 6s, iPhone 7: Around ₹5,000 to ₹7,000.

3. iPhone 8: Approximately ₹6,000 to ₹8,000.

4. iPhone X, iPhone XR: Around ₹15,000 to ₹20,000.

5. iPhone XS, iPhone XS Max: Approximately ₹20,000 to ₹25,000.

6. iPhone 11: Around ₹15,000 to ₹20,000.

7. iPhone 12, iPhone 12 mini: Approximately ₹20,000 to ₹25,000.

8. iPhone 12 Pro, iPhone 12 Pro Max: Around ₹30,000 to ₹35,000.

Please note that these prices are approximate and can vary depending on the specific repair shop or service center. It's always a good idea to contact them directly or visit their website to get accurate pricing for your particular iPhone model.

Types of iPhone Screens

There are several types of screens used in different iPhone models. Here are some common types of iPhone screens:

1. LCD (Liquid Crystal Display): LCD screens were used in older iPhone models, including the iPhone SE (1st generation), iPhone 6, iPhone 6s, iPhone 7, iPhone 8, and iPhone SE (2nd generation). LCD screens provide good color reproduction and visibility in various lighting conditions.

2. Retina Display: Retina Display is a term used by Apple to describe high-resolution LCD screens with pixel densities high enough that the human eye cannot distinguish individual pixels at normal viewing distances. Retina Display screens offer improved clarity and sharpness. They are found in various iPhone models, such as the iPhone 4, iPhone 4s, iPhone 5, iPhone 5s, iPhone 6 Plus, iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, and iPhone SE (2nd generation).

3. OLED (Organic Light-Emitting Diode): OLED screens are used in newer iPhone models, starting with the iPhone X. OLED displays offer deeper blacks, vibrant colors, and better contrast compared to LCD screens. They also provide improved energy efficiency. iPhone models with OLED screens include the iPhone X, iPhone XS, iPhone XS Max, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13 mini, iPhone 13, iPhone 13 Pro, and iPhone 13 Pro Max.

4. Super Retina XDR: Super Retina XDR is an enhanced version of OLED technology used in the iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13 Pro, and iPhone 13 Pro Max. It offers even higher brightness levels, improved contrast, and enhanced HDR (High Dynamic Range) capabilities compared to standard OLED displays.

Posted in: Technology
Be the first person to like this.