Repair of a Kohler Toilet That Runs

A Kohler toilet will work just after you’ve flushed it; it will stop after the tank has loaded with water. A running toilet not just causes a nuisance, though it wastes water as it raises the water bill of yours. Many issues are able to result in your Kohler toilet to work, every one of which you are able to correct yourself.

Test

Just before you replace some components or even make alterations in the Kohler toilet of yours, very first establish the cause of the toilet running by executing a simple test. Get rid of the cover out of the toilet ‘s tank, and hang on for it to stop running. Include many drops of food color on the water in the tank; the darker the food coloring, the greater, and wait to find the place that the food coloring travels. In case the food coloring heads directly for the tan rubber flapper valve in the bottom part of the tank, you have to get rid of the used flapper and insert a brand new one.

Float Valve

Food coloring running on the taller plastic material tube within the toilet ‘s tank suggests the water level within the tank is high. The sole means to fix the trouble is adjusting the level of the tank ‘s float valve. On many Kohler toilets the valve is a big plastic ball placed on a metal rod. Twist the metal rod down to bring down the ball, that will cause the tank to fill up with less water.

Additional Kohler toilets use a float valve that slides up so down on the metal rod. You are able to change these valves by pinching the clip which connects the valve into the rod, and glide the valve on the rod before releasing the clip. Take care to not bring down the float valve way too much; or else you are going to have troubles with the toilet not flushing all of the way.

Chain change

Look at the chain that connects to the handle on the exterior of the tank along with the flapper valve. The chain shouldn’t have even more than a single or perhaps 2 back links well worth of slack once the flapper valve is closed. Use needle nose pliers to correct the chain to the correct level of slack.

Sediment

Sediment will be knocked up and also created into a house ‘s plumbing whenever the water in the region is turn off. Turning the water off only in the house of yours also can stir up sediment that normally would sit stationary. Get rid of the cap on the roof of the fill valve in the toilet to look at the diaphragm seal for sediment. Flush out the diaphragm thanks to a constant stream of water, and replace it in the fill valve. In case flushing the diaphragm seal doesn’t work, you are going to need to set up a brand new one.