Reshaping Horse Hoof With Farrier Tools and Equipment

The continuous growing hoof wall is one of the biggest issues with horses meant for domestic and commercial purposes. Unlike wild horses, they spend most of the time in a stable. Due to the lack of physical movement, the hoof wall grows more rapidly. If you don't remove it, the increasing size will create difficulty in navigation after some time. In order to maintain the right shape of hooves, you need special farrier tools and experience of using them. Shops providing farrier service near you are the only solutions to this issue. They have adequate farrier tools and equipment meant for removing the extra wall, giving the right shape and nailing it with a perfect shoe. in this article, we are going to discuss the tools specially meant for hoof reshaping.

- Hoof knife
Deleuze and dried outsole of horses need timely removal. The solid surface require sharp edge tools. Very nice are designed in a manner that it can reach the inner parts of the hoof. Not only for cutting the overgrown sole but these knives are also useful for removing Derby and dirt inside the roof. This tool is an integral part of regular maintenance.

- Nippers
Nippers have C shaped mouths from both sides ending with sharp edges. This is an all-metal tool meant for removing the extra wall from the roof. Farrier knives alone cannot serve the purpose of trimming the sole and giving it a perfect shape. You need something more powerful and solid to make it work. Knives remove the extra wall from the inner side whereas nipples are necessary for reshaping the sides. A professional farrier service provider markdown the area of hoof bi encircling the area outside the horseshoe. Then they use the nippers to cut down this extra wall and reduce the size. However, this is just the second step of hoof reshaping. We also need rasps to give a finishing touch.

- Rasps
Rasps are among the essential farrier tools and equipment we need for rectifying the minor defects after using a nipper tool. Once a farrier service provider removes extra hoof material, the next step is to give a perfect shape. Rasps of coarse and fine radius are being used to rub on the hoof. It is just like we sharpen a metal with rasps. After using this tool, the horse hoof becomes ready to shoeing or pulling.

These are three essential tools necessary for reshaping the horse hoof. However, only professional farrier service providers know how to make use of them properly.