Aluminum Composite Panel Introduction

The Aluminum Composite Panel, known as ACP, is made of Aluminum Composite Material (ACM), which contains two thinly coated aluminum sheets. It is made up of two different materials (metals and non-metallic) that retain the original composition of the material (aluminum metal, non-metallic polyethylene plastic) as its main characteristics, and also overcome the disadvantages of the original material.

Due to its numerous advantages and huge conveniences,aluminum composite sheet panel is widely used in a variety of places, including outdoor occasions such as facades, partitions and exterior walls of buildings, curtain wall panels, renovation of old buildings as well such as indoor occasions such as ceiling decoration, advertising signs, display stands, purification and dust prevention.

Due to its excellent properties, aluminum composite panel has become increasingly popular and common in everyday life. The demand and consumption of aluminum composite panel has shown steady growth.

What is the composite aluminum panel used for?

The unique properties of aluminum composite panel determine its wide range of uses, including engineering, large-scale building wall decoration, shopping mall façade decoration, posters, stations, airports, displays, ceilings, pillars, counters, furniture , phone booths, elevators, factory wall materials, etc. The specific is as follows.

The exterior wall of the building and the curtain wall panel.

The exterior of the old building was modified and refurbished.

Balcony, equipment unit, interior compartment. Panel, signage plate and display.Decorative panels for interior walls, ceilings, advertising signs.The case from industrial materials, the refrigerating body of the car.Air conditioners, televisions, and other shell devices.

Different aluminum composite panel thickness standards and measurement methods In addition to great adaptability and good performance, the aluminum composite panel is also popular for its thickness and specifications. So what are the thicknesses of composite aluminum panel for different purposes? Generally speaking, the common total thickness of ordinary aluminum composite panels is 3mm, 4mm and 6mm etc. The standard edition size is generally 1220 * 2440mm. In addition, the following standard thickness data per application can be consulted:

1. ACP panels for decoration of exterior walls or advertising posters.
The upper and lower aluminum plates are generally made of corrosion resistant aluminum. The coating is usually coated with fluorocarbon or polyester. The thickness should be above 0.2mm, and the total thickness added.

2.Interior Aluminum Composite Panels
The minimum thickness of the top and bottom aluminum panels should not be less than 0.1mm, generally about 0.2mm, and the total thickness is generally 3mm. The coating can be polyester coating or acrylic coating.

3. Aluminum Composite Panels
For Curtain Wall Panel Construction: According to GB / T3880 requirements, the panels are generally made of 3000, 5000 series aluminum alloy sheets. The liner is coated with fluorocarbon resin, and the minimum thickness of The top and bottom aluminum foil cannot be less than 0.5mm, and the total thickness should be more than 4mm.