How to install exterior ceramic tiles?

Needless to say, the right choice of the appearance of outdoor paving is important. The paving should be sensitively harmonized with the house, garden, immediate surroundings and thus create a comprehensive impression. Most types of paving can be used both indoors and outdoors.

At present, we have an inexhaustible choice of cheap tiles Malaysia of various brands, the top in the field and quality are long-term Italian manufacturers who use the latest technology in production and work with the world's leading designers. Very trendy and at the peak of popularity lately are surfaces in imitation of natural materials- various types of wood, including patinated, stone or even marble. There are collections with industrial surfaces, ie in the appearance of concrete or various types of metals.

Technical parameters

It is nice to follow your personal taste when choosing outdoor ceramic tiles. However, it is no less important to orientate according to technical parameters, also because the climate of Central Europe is exposed to many vagaries of the weather. And they can wave with the life of the paving. It is therefore necessary to follow the pictograms when choosing it. These emphasize the most important parameters for the selection of outdoor paving: especially frost resistance, water absorption, anti-slip and abrasion resistance.

Snowflake

For outdoor use, it is necessary to use frost-resistant tiles that are resistant to long-term frost and weathering. Frost-resistant paving is usually marked with a snowflake symbol.

Letter “E”

The best properties in extreme conditions are exhibited by sintered ceramic tiles with low absorbency : these are marked with the letter E and for outdoor use must be less than or equal to 0.5%.

Shoe and markings R9 - R13

Anti-slip paving significantly reduces the risk of injury when walking on outdoor paving. For outdoor use, R10 - R12 is recommended according to the specific type of space for which the paving is intended.

PEI 4 to PEI 5

As exterior paving faces a greater load than indoor paving, it pays to choose products with higher abrasion resistance - ideally in the range of PEI 4 to PEI 5.

How to install exterior ceramic tiles?

Ceramic tiles on the balcony, terrace or sidewalk await a really challenging task. On the one hand, it must perfectly complete the overall visual of the exterior, on the other hand, it cannot be intimidated by any conditions of the external environment.

However, if you choose quality exterior paving, you do not have to worry about it being damaged by frost, rain, snow or extreme heat. High-quality pieces at affordable prices include, for example, exterior paving from Libelle Trading.

How to install ceramic tiles outdoors?

You have chosen the perfect paving for the exterior. How to proceed? There are several ways to install it.

1. Bonding of ceramic tiles

You will need glue, sealant and grout and penetrants for installation. It is very important that you properly prepare the surface before laying. Glue the tiles to the cleaned surface with glue and fasten with tile crosses and pins.

2. Laying ceramic tiles on the grass

You can install ceramic grass paving without having to undergo complex surface treatments. It is enough that the surface is at least as flat and without significant holes. Create gaps between the individual tiles to allow the grass to grow.

3. Laying ceramic tiles on gravel

With this method of laying paving, complicated surface smoothing is also not necessary. Gravel will take care of everything, leveling the surface. However, it is important that it is evenly distributed. You fasten the tiles with the help of concrete curbs, which must be placed on each side.

4. Laying ceramic tiles on sand

Ceramic sand tiles are a great alternative to sports fields, playgrounds or beaches. It can serve as a sidewalk, for example. The sand must be completely smoothed and at least 5-6 cm thick.

5. Installation with targets

Ceramic tiles installed on plastic targets create a space between the surface and the floor. You can adjust the height of the target yourself, thanks to which the floor will be exactly what you want it to be. Place targets of the same height on the treated surface and then lay the tiles on them.