How Do You Make A Broom?

With a broom you think of a handle with a brush on it. Brooms are used to sweep things together, such as rubbish, sand and dust. In the past, brooms were made of various materials: a wooden handle with branches tied with a string, a flexible branch or rope. The branches are of the following plants or shrubs or trees: birch, reed flowers, broom, heather, gold-of-pleasure, reed, willow or piping root roots. The longer the branches, the longer the broom will last. Today, outdoor brooms look different: a wooden handle with a wooden board in it to which fibers of coconut or plastic are attached. Indoors, other finer brooms made of wood or plastic are in use with nylon and animal hair.

Simply clean with a broom

The classic among cleaning devices is the broom. A broom simply works without electricity, a broom can be used to sweep extremely quietly and effectively. Brooms or scrubbers can be used in an apartment with smooth floors or of course as a street broom outdoors. While brooms for the home are usually softer, street brooms for gardens and the like are made of strong bristles. You can find a good broom for cleaning laminate floor via online.

Brooms in prehistoric times

Brooms as archaeological finds from prehistoric times are not known, but it is likely that brooms were needed as they are today. Based on these findings and looking at cultures that have a similar society, it is plausible that brooms were also part of the design of houses in prehistoric times.

Make a broom step by step

Necessities
1. Rope
2. Forest with birch and willow or hazel

Step-by-step Action

Step 1. Gather the twigs of a birch - preferably two-year branches with a thickness of half a centimeter to one centimeter and a length of 100 to 120 cm. You need to collect about 50 branches per broom.

Stao 2. Let the branches dry until they are completely dry (due to shrinkage).

Step 3. Make a 12 cm diameter bunch of narrow branches with a few thicker branches between half a centimeter to one cm.

Step 4. Cut the ends of the twigs at the same distance to create the top of the broom.

Step 5. Take a piece of string and make a tight knot at thirty cm from the end of the bunch. Make a button on it again.

Step 6. Push the rope with the knot upwards to 5 cm below the top.

Step 7. Make a knot at 40 cm from the end, so 35 cm below the first mast knot.

Step 8. Tie a string with a knot to the lower mast knot and the upper mast knot to prevent sagging. Do this at least twice.

Step 9. Collect a hazel or willow stalk with a thickness of about 2 cm. Make a point on the thin side of the stick. Press the stick into the bundle of twigs from the top until the stick is two inches past the second knot.

Step 10. Place the broom in water for a day, think of a ditch or pond. The branches become flexible. The broom is ready for use.

TIP: Occasionally wet the broom so that it is moist. This keeps the broom sweeping well.