The Correct Way to Check the Condition of the Honda Vario 150 Brake Shoes

Honda Vario 150 is Honda Vario 125's twin. Vario 150 is equipped with a high performance engine. For that, it is very important to have a good braking system to keep up with engine performance. Brakes are a safety component on a motorcycle that functions to slow down and stop the wheel rotation. This allows the vehicle to slow down and stop when needed. There are two brakes used on the Honda Vario, namely disc brakes for the front and drum brakes for the rear. Both disc brakes or drum brakes, both depend on the condition of the brake pads. In disc brakes, the speed of rotation of the wheels is slowed by clamping the disc with brake lining. While on drum brakes, brake pads will press the drum wall on the rim. Brakes which are included in this safety component need to be considered in condition. With age, of course, the braking performance will also decrease. Therefore, Honda Vario owners also need to know how to check the condition of their brake pads. Here are a few things to note: 1. A Squeak Sound Appears when Braking Squeaking sounds may appear when the canvass friction occurs with the disc, if the canvass condition has started to thin or even run out. In addition, squeaking can also occur when the surface of the brake pads is dirty or wet or when the brake pads start to harden. 2. The distance to pull the brake lever is deeper The brake lever will go deeper when you pull it if the brake pads start to thin. This condition occurs in drum brakes. The thin brake pads on the Honda Vario will make the distance between the brake pads and the drum walls even greater. Thus, the brake lever will be further away when pulled. 3. Has Exceeded The Wear Indicator Limit In disc brakes, brake pads that are worn but still in use will reduce the volume of brake fluid. If the brake fluid is below the minimum limit, the braking system will not be maximal. In fact, this condition also has the potential to cause brake failure. To maintain optimal braking performance and performance, it is important to take care of every braking component, both front and rear brakes, both disc brakes and drum brakes. Conclusion Caring for the brake device is one thing that must be considered for every motorcycle owner. This is because it is related to driving safety factors and its function is very vital. It's better to spend money to replace components than to be involved in an accident because the brakes don't work. Related reading : simulasi kredit mobil