Case IH Combine Settings: An Overview

The Case IH combine harvester is important equipment that has revolutionized farming work. The process of harvesting, which is the most important activity on a farm can be completed quickly and at lesser expense. The saving in manpower and time, along with the better quality of crop and improved productivity makes the use of the harvester highly beneficial. All these benefits can be obtained by making changes in the Case IH combine settings. A single harvester can be used for multiple purposes to get varied benefits by changing the settings. The blog looks at how these settings can be managed effectively.

Managing the settings

The following is an overview of the Case IH combine settings that can be managed to ensure the best results from this equipment. By changing the settings, the equipment can be used in different ways to experience the complete benefits. The following is an overview of the settings:

1) Rotor loss is a major problem faced during harvesting. This problem can be solved by using the right accessories and using the right Case IH combine settings. The optimal settings ensure more grain can pass through thus preventing overloading and rotor loss. This improves the yield.

2) The cylinder speed and the fan speed are two important factors that help in managing the harvester better. A single harvester can be used for multiple benefits by changing the settings. For example, if the cylinder speed is 900 to 1,150 rpm, then rye can be harvested. By changing it to 250 to 450 rpm, the same harvester can be used to harvest soybean.

3) Chafer settings is another important parameter in the Case IH harvester. This settings ensures that the grain and the chaff are separated effectively. When this is done, more clean crop is produced. The grain collected is then stored properly in the tank.

4) Ground speed of the harvester is another key parameter. Setting the clearance plays an important role. If the clearance is too much, the crop may slip through causing wastage. If the clearance is less, then the grain may be damaged while cutting. The optimal settings need to be understood and set.

5) The conveyor is a key part of the harvester. The conveyor needs to be fixed in the right way, which is tight and proper. Not setting the conveyor as tight can cause damage to the grains as it moves along the conveyor.

6) Adjustments to the settings of the cutter are important since this is where the crop is cut and harvested. The reel axle must be kept 6 to 12 inches in front of the cutter bar. The reel speed must always be 10 to 25% more than ground speed.

7) Feeder house settings must be made with slats 1 inch above the floor.

As could be observed, knowing the right Case IH combine settings can be crucial in getting the best out of your harvester. You can learn the settings from the manual. Once known, they must be used consistently to get the best results.