Categories
Categories
Daniel Philip
by on June 21, 2021
75 views

Have you become frustrated owing to the appearance of error code 70 on your Brother printer? Have you gone tired of looking for the right solution to it? If yes, your search has brought you to the right destination. A Brother printer user may get worried when the error code 70 suddenly appears on their printer. We have discussed three great solutions to the error code. Anyone with little technical knowledge will be able to fix the error with the solutions provided below. Let’s get started and first take a look at the causes.

Sort Out the Error Code 70 on Brother Printer

Causes for the Error Code 70 on Brother Printer

When the error code 70 appears, your Brother printer will show the “Print Unable” message. The occurrence of this error code will not allow your printer to print documents and affect the functioning of your printer. If you see the error code 70 “Print Unable” message on your Brother printer, there may be an issue with settings on your Brother printer. Below is how to fix the error 70. Read below.

Solution 1

In order to fix the error code 70 on a Brother printer, follow the instructions:

  1. First of all, a Brother printer user needs to turn off their printer.
  2. Take out all its power cable from the wall outlet and USB cable from the computer.
  3. Make sure that your Brother printer is wholly disconnected from the power supply.
  4. Open the printer cover and leave it in a cool place for about 30 minutes. Let it cool down.
  5. When the printer cools down, close your Brother printer’s covers properly.
  6. Connect the power cable to your Brother printer and turn it on.
  7. Doing so will reset your Brother printer and fix the error.

Note: If you want to prevent the appearance of the error code 70 on your Brother printer, make sure that you give your printer rest during an hour-long operation. When a Brother printer becomes overheated, the error is likely to occur on your printer. We have provided another effective solution below.

Solution 2

The cause for the error code 70 may also be the paper jam in the fuser roller. If you remove the paper jam in the fuser roller, you will be able to get rid of the problem quickly. In order to sort out the error code 70 on a Brother printer, one can follow the provided steps:

  1. First, place the Brother printer in a dry and safe place.
  2. Turn off your Brother printer first and detach all cables to avoid causing damage to the wires.
  3. To wrap down the fuser cover, you need to pull out the green tabs.
  4. Take a look inside the printer and see if there is any paper inside the printer.
  5. If you see any piece of paper inside it, you need to remove it gently.
  6. After you have removed the paper stuck inside the printer, you now need to close the rear cover and fuser cover properly.
  7. Now, reconnect the printer to the power supply and turn it on to see if the Brother printer error code 70 is gone.

Note: We have described the two great solutions above. In the first procedure, we reset the Brother printer and tried to fix the error. In the second procedure, we cleared a paper jam in the fuser roller. Both of these methods are proven and work great to fix the error 70. If none of these work, try out the third solution.

Solution 3

With the help of the procedure mentioned below, you can rectify the error code 70 on your Brother printer. Follow the steps:

  1. The first thing you need to do is turn off the brother printer.
  2. After that, you need to disconnect your Brother printer from the main power supply.
  3. Remove the front cover gently by pulling cover release buttons.
  4. Allow your Brother printer to cool down for almost 30 minutes.
  5. When a printer works for hours, its internal parts may become hot and cause the printer to malfunction.
  6. Now, you are to pull out the drum unit gently by holding it carefully.
  7. Place it aside safely on a clean surface or cloth.
  8. Take a look inside the printer to check if there is any paper stuck inside the Brother printer.
  9. If any, take it out gently.
  10. When you have cleared the paper jam in the fuser roller, set the front cover and fuser cover in the previous position properly.
  11. When the above procedure is complete, turn on your Brother printer to see if the error 70 has disappeared.

Note: If you do not have technical knowledge about printers and their parts, we ask you to contact Brother printer experts to eliminate the issue.

Conclusion

Brother has earned a great name for offering excellent printers. Brother printer users get disappointed when the error code 70 appears on their printer. We have discussed three great solutions for you. Anyone can shoo away the error 70 with the help of the provided solutions. We hope you find the solutions helpful.

Be the first person to like this.