Steps to Troubleshoot HP Printer Not Activated Error Codes 30, 20, and 41!!

HP printers are one of the leading choices of the consumers, which is used by consumers both personally and professionally. Although, when you use the device, it offers several unique features. But sometimes, users encounter issues related to HP printer not activated error codes 30,20 or 41. Users face such problems because of printer driver interference with the Windows system. While these errors might be irritating, you can simply get rid of the issues by following the basic troubleshooting steps.

Check out the guide properly to explore why HP printer not activated errors code 30 issue occurs and troubleshooting steps to deal with the problem.

Causes for HP Printer Not Activated Error Code 30

The HP printer not activated error 30 indicates that your printer is working correctly, but the HP printer stops working because of some unknown factors. The possible reason for the issue is a loose cable connection or matters related to the hardware.

Another reason for HP printer laser MFP 1200w error 30 message displays is because of the carriage of the printer. There might be chances that the carriage is shifting and the printer light starts flashing. So, it is advisable that you wait until it settles and the HP printer becomes silent. In such a situation, you must try to update the HP printer firmware.

How to Troubleshoot HP Printer Not Activated Error Code 30?

The HP neverstop Laser MFP 1200a error 30 issues might be resolved by following the troubleshooting steps mentioned below:.

Method 1: Restart HP Printer

1. You should switch off the printer and then disconnect the USB cable and power from it..
2. Wait for some time and plug the USB cable into the HP printer and computer..
3. Now, reconnect the power adapter to the printer and the electrical socket..
4. Lastly, switch on the printer and check if the HP neverstop error 30 issues are resolved or not..

Why HP Printer Not Activated Error Codes 20 Occurs?

The HP printer not activated error codes 20 occurs when your HP printer is not configured correctly in the system. Another reason for HP printer error code 20 is when the PDF converter encounters an issue with the activation code of the printer. While the problem can be a bit irritating, you can follow the steps to get rid of it:

To troubleshoot the error, you can set the printer as the default printer. To set it as the default printer, check out the steps:

1. Set HP printer as the default printer.
2. Move to the control panel and choose hardware and sound.
3. Choose devices and printers.
4. Right-click on the print and choose set as a default printer.
5. Lastly, reboot the computer to save the changes.

Summing Up

In this guide, you will get the information related to the HP printer not activated error code 30. Follow the steps correctly as given in the guide to troubleshooting the issue smoothly.

Some Related Stories To Read

How to Fix HP Boot Error Hard Disk 3F0
HP Envy 4520 Printer Offline Error
How to Fix HP Printer in an Error State