Categories
Categories
by on August 26, 2020
170 views

Canon printer is one of the most popularly known printers on the market now and is known for its compactness, which will not take much space on your desk. It features the specifications that will help you determine if the printer will suffice your needs or not. But one way or the other, some users while accessing their Canon printers are complaining over the issue of How to install Canon Pixma Printer Driver? If you are looking for the perfect resolution to fix this sort of issue to Install Canon Pixma Printer Driver, you must follow the steps that have been mentioned below. So let’s get dive into the following troubleshooting steps. 

Basic Troubleshooting Steps to Install Canon Pixma Printer Driver

Step 1: Open the cover of the rear tray and lift the support of paper that open the cover of the feed slot

Step 2: Now, to open paper guides, slide them and in the centre of the rear tray. Load the paper with print slide facing upwards. 

Step 3: To align paper guides of the paper stack, slide them.

Step 4: Now, open the paper output cover of the printer.

Step 5: Be sure not to touch the fine cartridge holder till it stops. From the Color Fine cartridge, unwrap the protective tapes.

Step 6: In the left holder, install the Color Fine cartridge, hold the Color Fine cartridge in a diagonal position, and insert it properly. 

Step 7: Be sure that you do not touch the electrical contact located and lift the Fine cartridge until you hear a clicking sound.

Step 8: Install the Fine black cartridge into the right holder and confirm that the cartridges are installed properly. If not, then remove and reinstall them.

Step 9: Finally, Close the paper output cover if you see a message to install.

Amazing Steps to Setup Canon Pixma Printer

Step 1: Firstly, Plug the power cord and adapter into the printer, and then into an outlet on a surge protector. 

Step 2: Install the printer's ink cartridges and Open the printer cover and position the cartridges according to the printer manual.

Step 3: Load the paper tray and Install the drivers and software for your Canon printer. Be sure that you can install the correct drivers for your OS.

Step 4: Switch off the power and locate the USB cable for your all-in-one printer.

Step 5: Now, your computer will install and recognize your all-in-one printer.

After, following all the above mentioned steps, surely, you can get Setup Canon Pixma Printer installed.

Contact Our Certified Expert Team for Immediate Assistance

If you have any doubts regarding our method for downloading and Canon Pixma Printer installation, get in touch with our certified and experienced technical team for immediate response. 

Related Queries:

Canon Pixma wireless printer setup

canon pixma printer setup

Connect Canon Pixma MG3620 to WiFi

Canon mx922 troubleshooting

 

Posted in: Canon Printer
Be the first person to like this.
Thanks a lot for your guidance in setting up and installing the Canon Pixma printer driver http://mybridalengagement.com/engagement-tips/the-difference-between-engagement-rings-and-wedding-rings/ as I was searching for its procedure for a long time and it is through your post I came to understand t... View More
Like December 7, 2020