g4Elon brown

If the battery status bar of your Mac/MacBook says, “Replace Now” or “Service Battery,” that means the battery needs to be serviced on an urgent basis. While the battery service warning can turn up suddenly and unexpectedly, there could be several factors contributing to this issue. Most of the reasons for battery service warning to show up are related to software updates, poor battery management, strange battery performance, a bug, or simply the requirement of a new battery. Keep reading this article to learn a few possible fixes. Check Your Cycle Count The battery life of a MacBook is decided by its cycle count, which stands for the amount of 100% – 0%. Evidently, the battery life of a newly purchased MacBook is much better than an old one. Actually, it is the bigger cycle count that plays its role in deciding the battery life. So, the bigger the cycle count, the better will be the battery of a MacBook. As far as the “Service Battery” warning is concerned, it’s normal to experience it; once you have hit the official cycle count of your MacBook’s battery. Fortunately, there is a way to keep a track of your MacBook’s cycle count. Here is how: Step 1: Start by clicking on the Apple menu logo followed by “System Information.” Step 2: Scroll down to find the “Hardware” section and click “Power.” Here you will find the relevant battery information displayed, including your cycle count. Step 3: Check your cycle count limit on Apple’s support page. If the number listed in your MacBook exceeds the value of the cycle count suggested on Apple’s page, then you know the reason for the Service Battery warning. If your Mac’s cycle count is way higher than it should be, then keep reading to fix it. Reset the SMC (System Management Controller) Note: Your MacBook must have a non-removable battery (Mac computers 2009 and later) to try resetting the SMC. If you do, then here is what to do: Step 1. Start by shutting down your MacBook. Step 2. Now, plug in the power adapter to your computer and power source. Step 3. Simultaneously press Shift + Ctrl + Option keys plus the power button for about 30 seconds, and then release all of them. Step 4. Now, press the power button to turn on the computer, as would usually do. And check if the “Service Battery” warning has disappeared. If the warning still exists, scroll down to try the next suggestion. Recalibrate the Battery While this method can take hours, you will get rid of the “Service Battery” warning. Plus, Apple suggests its users calibrate their MacBook’s battery every few months to maintain good battery health. Follow the below instructions: Step 1. Make sure that your MacBook’s battery is fully charged to 100%. Step 2. After the battery is charged to 100%, keep the MagSafe plugged into the power source and the computer for another two hours. Step 3: Now, disconnect the power source and use the computer until it runs out of battery power. Don’t connect the power cord even when you see the low battery warning; later, the MacBook will sleep automatically. Now, turn it off. Step 4. Keep the computer off for five hours or more without charging it. Then later, charge your MacBook with the power adapter or MagSafe. This is how to calibrate your battery. In short, charge it to full, drain it to zero, and then charge it again. If either or both of the above methods didn’t help you get rid of the “Service Battery” warning, then as a last resort, go to an authorized Apple service provider. Perhaps it’s time to replace your MacBook’s battery. Mathew Anderson is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, Mathew has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup. Source:-How to Fix the Service Battery Warning on Your Mac

If the battery status bar of your Mac/MacBook says, “Replace Now” or “Service Battery,” that means the battery needs to be serviced on an urgent basis. While the battery service warning can turn up suddenly and unexpectedly, there could be several factors contributing to this issue. Most of the reasons for battery service warning to show up are related to software updates, poor battery management, strange battery performance, a bug, or simply the requirement of a new battery. Keep reading this article to learn a few possible fixes. Check Your Cycle Count The battery life of a MacBook is decided by its cycle count, which stands for the amount of 100% – 0%. Evidently, the battery life of a newly purchased MacBook is much better than an old one. Actually, it is the bigger cycle count that plays its role in deciding the battery life. So, the bigger the cycle count, the better will be the battery of a MacBook. As far as the “Service Battery” warning is concerned, it’s normal to experience it; once you have hit the official cycle count of your MacBook’s battery. Fortunately, there is a way to keep a track of your MacBook’s cycle count. Here is how: Step 1: Start by clicking on the Apple menu logo followed by “System Information.” Step 2: Scroll down to find the “Hardware” section and click “Power.” Here you will find the relevant battery information displayed, including your cycle count. Step 3: Check your cycle count limit on Apple’s support page. If the number listed in your MacBook exceeds the value of the cycle count suggested on Apple’s page, then you know the reason for the Service Battery warning. If your Mac’s cycle count is way higher than it should be, then keep reading to fix it. Reset the SMC (System Management Controller) Note: Your MacBook must have a non-removable battery (Mac computers 2009 and later) to try resetting the SMC. If you do, then here is what to do: Step 1. Start by shutting down your MacBook. Step 2. Now, plug in the power adapter to your computer and power source. Step 3. Simultaneously press Shift + Ctrl + Option keys plus the power button for about 30 seconds, and then release all of them. Step 4. Now, press the power button to turn on the computer, as would usually do. And check if the “Service Battery” warning has disappeared. If the warning still exists, scroll down to try the next suggestion. Recalibrate the Battery While this method can take hours, you will get rid of the “Service Battery” warning. Plus, Apple suggests its users calibrate their MacBook’s battery every few months to maintain good battery health. Follow the below instructions: Step 1. Make sure that your MacBook’s battery is fully charged to 100%. Step 2. After the battery is charged to 100%, keep the MagSafe plugged into the power source and the computer for another two hours. Step 3: Now, disconnect the power source and use the computer until it runs out of battery power. Don’t connect the power cord even when you see the low battery warning; later, the MacBook will sleep automatically. Now, turn it off. Step 4. Keep the computer off for five hours or more without charging it. Then later, charge your MacBook with the power adapter or MagSafe. This is how to calibrate your battery. In short, charge it to full, drain it to zero, and then charge it again. If either or both of the above methods didn’t help you get rid of the “Service Battery” warning, then as a last resort, go to an authorized Apple service provider. Perhaps it’s time to replace your MacBook’s battery. Mathew Anderson is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, Mathew has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup. Source:-How to Fix the Service Battery Warning on Your Mac

With Android’s easy to use interface comes the countless opportunities to customize your device. That said, why not customize the app icons in your Android, like everyone else owning the rival device is doing. Till the time Android is supporting third-party apps, there are only a few things that Android cannot do, and other operating systems can. Case in point, setting a custom icon for your Android apps is a pretty straightforward process. In this article, you will learn how to do that yourself on your Android device. More aesthetical news here is that while you can download custom app icons using certain apps from the Google Play Store, users also have the option to use an image directly from their galleries or the Web to use it as their custom app icon. Edit an Image You Want to Set as an App Icon To set an image as an app icon, you must use a square image with a transparent background. The best part is that you can tweak any image according to the requirement mentioned above. To remove an image’s background, open a browser on your phone, and navigate to “remove.bg.” This website is free to use and will quickly do the job for you. All you have to do is upload the desired image and let the program do its thing. The resulting image will load within seconds, after which you can get the image on your device by tapping on the download button. In case your source image is not square-shaped, you can edit the image to fulfill the format requirement. To do so, open a browser on your phone and navigate to “Pixlr E.” Once you are on the website, upload the image, then tap on “Image,” followed by “Canvas size.” On the screen that appears, set the image height equal to the width. Once set, hit the “Apply” button, then save the image to your device. How to Create a Custom App Icon Since Android doesn’t have a built-in feature to customize the app icon, you will need to download a third-party launcher app. You can use Nova Launcher. It is the best in the category. Follow the instructions below to set up the app and to create a custom app icon. Step 1: Download the Nova Launcher app from the Play Store and go through the setup stage. Step 2: Now, navigate to the app you want to set a custom icon for, then press and hold it until the menu pops up. Tap on Edit followed by the app icon. Step 3: A list of options will appear from which you can select the image you want to set as your icon image. From this list, choose Gallery, and then browse for the image that you edited earlier to use. Step 4: If the image were edited correctly, it would easily fit inside the rectangular crop that shows up. Step 5: Finally, tap on Done, and you will find your new icon on the home screen. Bring Back the Old Icon If your new and customized app icon doesn’t soothe your eyes, then you can quickly get your old app icon back. All you have to do is press and hold the app icon again, tap on Edit from the options list. Now, tap on the icon image to find the default icon underneath. Tap on it to get back your default icon. We hope that you can now boast about your custom app icons in front of your friends. Emily Williams is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, she has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup. Source:- How to Set Custom Icons for Your Android Apps

Sometimes the latest version of Windows drivers may ruin your user experience. It is possible that you like traditional drivers more for certain devices. For example, I like Realtek old audio drivers that have a built-in equalizer. If you want to rollback a particular driver on your Windows computer, then you have come to the right place. In this article, I am going to show you how you can rollback a driver to its previous state with easy steps. Why Would You Want to Rollback a Driver? Updating drivers on your Windows-based computer helps improve the functionalities of your system. However, some driver updates might include bugs, coding errors, and other technical problems. They might influence the overall performance and productivity of your device. As a result, you may be forced to remove or rollback a newly updated driver from your device. Step by Step Guide to Rolling Back a Windows Driver Whenever you roll back a driver, Windows uninstalls the current version of the driver and re-install the previous or older version. This allows you to restore the changes that the driver recently made to your computer. Here’s how you can do this: First of all, ensure that you have logged into the administrator account and have all permissions. Also, make sure to create a restore point of your computer so you can restore the changes in case anything goes wrong. Keep in mind that rolling back a driver can affect your computer terribly. So if possible, also take a complete backup of your computer’s current state. Once you are ready, hit the Windows button on your keyboard to open the Start Menu. Search for the Device Manager and then right-click on the relevant result. Select the Run as Administrator option from the given drop-down list. Now you will see the device manager on your screen. Select the device which is causing problems and for which you want to roll back the driver. Once you find the device, right-click on it and then select Properties. Now click on the Driver tab from the top of the window. Hit the option that says Roll Back Driver. Press on the Yes button when you see the confirmation prompt. This will confirm your decision, and the rolling back process will trigger. Wait patiently and let the process complete on its own. Please do not interfere with the process by clicking anywhere on your screen. Mathew Anderson is a creative person who has been writing blogs and articles about cybersecurity. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs, and websites. Source:- How Do You Rollback a Driver on Windows 10