richard herry

Error code 0x97 is a warning message, when there is an issue with the internal hardware. It may happen due to motherboard failure or other internal parts. While this technical issue takes place, it occurs suddenly and may lead for your printing machine to turn off or prevent printing. Hardware failure may need a quick fix or replacement. To fix this error code, you can call at Epson support phone number to get effective technical methods. Here are some technical ways to fix Epson error code 0x97 instantly. Online Troubleshooting ways to fix Epson error code 0x97 When a hardware failure takes place without warning message, you can try the following steps- Unplug and Plug-in- • When this error message appears, turn on and off power and disconnect. • Disconnect all linked cables. • Disconnect USB drivers. • Eliminate all printer cartridges. • Still turned off, push down power to release all rest current in the printing machine. • Connect in all the cables and USB. Install again printer cartridges. Turn on power button. • Observe if the error message remains. • If error continues, go for next step- Unplug and plug in (2)- • Turn off Epson printer and disconnect. • Unplug all the power cables and USB. • Wait for five minutes until printing machine cools down. • Press and hold power option for sixty seconds. Don’t release. • After 60 seconds, connect in the power cable and hold for another sixty seconds. • Leave power option. Make sure if the error message still displays. Clear out mechanic pad • Turn off Epson printer and disconnect. • Eliminate printer cover and casing. • Wet tissue with hot water and try to wipe clean pad • Release wet tissue for a few minutes on the pad • Take out tissue and release it to dry fully. • Plug in and turn on the printing machine. • Observe if error continues, you can call at Epson printer support phone number to get expert’s help immediately. View-Source:-https://epsonprinterco.blogspot.com/2019/06/how-to-get-rid-of-epson-error-code-0x97.html