Eva winget
posted a blog.
How to Fix My Gigabit Ethernet Stuck at 100 MBPS?
How to Fix My Gigabit Ethernet Stuck at 100 MBPS?
02 Mar 2021Category:Network
Configuring the 1GB network is easy, but if your Gigabit or the LAN connection is stuck at 100 MB, then you need to troubleshoot and diagnose the problem in a sequence of steps. The first thing you need is to check if your LAN supports speeds of 1GB. Read this blog to find out how to fix the slow Gigabit internet.
Troubleshooting Your 1 GB adapter
If your network adapter previously supported 1 GB of transfer rates and has suddenly stuck at 100MB, it could point towards hardware issues. To fix this issue, you will have to check the physical components of the network. To quickly diagnose your network cable, test the network connection with a different cable. The network jacks on either end of the cable can also be the problem. To verify the cable, check both the connection jacks for any loose wires. Check the entire cable for any damage to the harness. A damaged or bent harness reduces the amount of information that a cable can transfer. Also, check whether the cable is capable of transferring 1 GB speed.
Troubleshoot your Network Configuration
If the cable is optimum, then you will have to look for the network configuration, adapter properties, and router settings.
Windows Troubleshooter: To initiate the Windows troubleshooter for your network adapter, go to the Control Panel and change the “Category View” in the top-right corner to “Small Icons.” Then from the list of applications, click on the Network and Sharing Center, inside of which you will find the Change your Network Settings. Click on it and select the Troubleshoot Problems option. In the Troubleshoot option, click on the Network Adapter button and then click on the Run Troubleshooter. Now select the network adapter you are currently using and click on the Next tab to continue. The troubleshooting will initiate. If the windows find any issue, it will recommend a solution.
Check Adapter Settings: If the windows did not detect any issue, you would have to check if your adapter settings are compatible with 1GB speeds. In the Network and Sharing Center, hit the Change Adapter Settings button and select the adapter you are currently using. Right-click on it and then select the Properties option. Within the Properties section, click on the Configure button to continue. Configure tab will open the Device Controller properties. Select the Advanced tab and click on the Speed and Duplex settings. On the right-hand side, you will find a Value menu. Change the Value similar to the network speed of your LAN connection. Then click on the OK button to apply the setting.
Update the Adapter Driver
To update the adapter driver, follow the given steps:
Go to the ethernet properties window as mentioned above and click on the Configure tab to open the Device Properties Window.
Then click on the Driver Tab and select the Update Driver option.
In the Update Driver, settings choose the “Search automatically for updated driver software” option.
Windows will connect to the internet and automatically look for the driver updates for your device. If there is a new update, windows will install the driver on the system.
These are some of the easy troubleshooting fix to increase the network speed of your Ethernet connection to its usual 1GB transfer capacity.
Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.
Source: https://softblogsonline.com/how-to-fix-my-gigabit-ethernet-stuck-at-100-mbps
Like
Be the first person to like this.
Eva winget
posted a blog.
When your printer is not responding to the commands, your Canon printer is facing a communication error. The technical issue may be related to either the operating system or USB connection. If you have become tired of searching for the solution to the communication error, you are lucky to have come to the right place. The article describes why the communication error occurs and how to get rid of it. Fixing the communication error on your Canon printer is easy with the help of the steps described below. Let’s check them all.
Why Does the Communication Error occur?
Communication error is not to be feared. It is a common error like several other errors that often occur on Canon printers. The reasons for this may be the following:
The printer’s drivers may be outdated.
Your printer may not be properly connected to your computer.
There may be an issue with the USB cable.
These are the main reasons that give birth to a communication error. You have now become aware of why the communication error occurs, so it may be easy for you to resolve it. Let’s learn how to resolve the technical issue.
Focus on Configuration Settings
Printer drivers cause the communication error, so we will describe how to configure the printer port in the printer drivers. Follow the below-mentioned instructions:
Log in as a user with administrator privilege.
Select the items from the Start menu.
If you use Windows 7 or above, you need to select the Devices and Printers from the Start menu.
Here, you will see Canon and your printer name on the computer.
Right-click the same and select the Printer properties.
Now, confirm the port settings by clicking on the Ports Tab.
If the printer does not respond, you need to reinstall the printer drivers.
Note: Before you reinstall the printer drivers, you first need to uninstall the outdated drivers.
Make Sure that Your Printer is Properly Connected to Computer
If the connection between your computer and printer is not established correctly, this error may occur. Below are the ways to establish a connection between computer and printer. Follow the instructions:
If you use a USB hub for connection, disconnect it.
You need to connect the printer to the computer directly. Try printing again.
If the printing process becomes normal, it means that something was wrong with your USB cable.
You can replace the USB cable with the new one to eliminate the communication error.
If the error still appears, try reinstalling the printer drivers and set up the connection again.
You can print the documents now.
Note: A Canon printer user can fix the communication error with the help of the provided tips. If one is not aware of the Canon printer’s inner workings, we recommend such a user avoid taking risks. Contact the Canon support team in this case if required.
Conclusion
By putting the steps above into action, you can troubleshoot the communication error on a Canon printer. The solutions will help a Canon printer user eliminate the error.
Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.
Source: How to Fix Communication Error on Canon Printer
Eva winget
posted a blog.
A browser like Chrome stores certain information from the websites you visit in its cache and cookies section. Clearing cookies from your Chrome browser fixes issues such as loading or formatting problems of the websites. Websites store cookies to save information such as login status and site preferences, and other details so that it remembers you the next time you visit that site. Read this blog for easy steps to clear cache and cookies on chrome.
Clear Cookies on Chrome Computer
Open the Chrome browser on your computer.
Click on the More menu at the top right corner of your browser.
Then go to More Tools and click on the Clear browsing data tab.
Choose a time range at the top. If you want to delete everything, select All Time.
Then check the Cookies and other site data option and Cached images and files option.
After that, tap the Clear data tab. All the cookies and cached files from your browser will be deleted, and the websites will lose all your previous information.
Clear Cookies Chrome Android
In your Android phone or tablet, open the Google Chrome browser.
Click on the three dots at the top right corner.
Click on the History tab and then tap on Clear browsing data.
Select a time range at the top and select All Time if you want to delete everything.
Check the boxes next to the Cookies and site data tab and Cached images and files tab.
Then click on the Clear data. All the cookies, cache, and site data will be deleted from your Android chrome browser.
When you clear cache and cookies on chrome, then some settings on the sites you have previously visited gets deleted. Sites will load slower because the content will load again due to the loss of previously-stored cache files on your chrome browser.
Eva Winget has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Eva has written several technical blogs, manuals, and reviews for several renowned websites.
Source: How to Clear Cache and Cookies on Chrome?
Eva winget
posted a blog.
How to Install and Setup McAfee Total Protection in Your PC?
McAfee Total Protection is an all-in-one antivirus software that provides blanket protection to all the devices in a household against malware, ransomware and other viruses that might harm your device. If you are confused about how to install and setup McAfee total protection in your PC, then this guide is for you. Read the blog for step-by-step information for the safe installation of this antivirus.
System Requirements
The minimum system requirements of your PC should be:
Windows 8 or higher with 32 and 64-bit support.
Pentium compatible process with SSE2 support.
500 MB of available storage space.
Web browser- Internet Explorer 9, Firefox, Chrome.
Supported Email clients- POP3, MAPI, and web email support.
Before Installing
Make sure that your Windows OS is up to date and uninstall any other antivirus or security program that is already running on your PC. It is important to uninstall any other security products of McAfee for smoothly running the total protection software. Use the McAfee Consumer Product Removal tool for successfully removing any other security products from your PC. Then restart your computer.
Installing McAfee Total Production on Your PC
Open your web browser and go to the McAfee’s website. Go to the product page and fill your account credentials to log in to your account. If you don’t have a McAfee account, then register on the website. Select the product you want to install, purchase that product and then accept the agreements and click on download. The application file will be downloaded in your system. Double click on the downloaded file and an installation window will open. Follow the subsequent prompts and your product will be installed in your system without any issues.
Product Key
You will receive a 25-digit alphanumeric key on your registered email id after purchasing the product. That is your product activation key. Use that key to activate your installed McAfee Total Protection. After entering your product key, the antivirus software will be activated and ready to use.
Eva Winget has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Eva has written several technical blogs, manuals, and reviews for several renowned websites.
Source: How to Install and Setup McAfee Total Protection in Your PC?
Eva winget
posted a blog.
The Apple MacBook lineup is packed with a ton of features, and it is difficult to remember all of them at once. Among plenty of unique features, some are considered as an important and handy feature. People that are using Mac for years are well aware of some hidden features, but if you are using it for the first time, and then you must know why Mac is so special.
In the last big update of macOS 11 Big Sur, Apple made a couple of significant changes and improvements in UI and in the way of working. But most importantly, Mac is still the same Mac, but with more iOS designed UI and features. So if you’re interested to know more about your Mac, here’s the guide for you.
Free Updates
You might have heard that Apple charges a lot for its services and products, but that’s not the case with Software Updates. iPad, iPhone and Mac updates are always free of cost whenever the user updates. Every year Apple releases a big update for their users that changes the device incredibly.
Since the launch of the Mac, Apple has offered free updates, and still, numerous updates related to bug fixes and app improvements arrive in a single year. So the people who want to give their Mac a new look or wish to get a seamless experience, can software update their Mac anytime if the update is available.
Updating software on Mac is nowhere difficult. You simply need to go to System PreferencesSoftware Updates.
Sign Documents without any Additional App
Signing the documents feature in Mac is one of the most underrated features. This feature is mostly useful for school or work. To access this feature, you simply need to open a document for making a sign. Press the pencil icon over the top bar, and make a sign and save it as your signature. It will be added to the document.
Apple Own Version Similar to Google Docs
The three built-in apps on Apple Mac are Keynote, Pages and Numbers. All these three apps are similar to the Google Sheet, Docs and Slides or the Microsoft Excel, PowerPoint and Word. However, a big number of users use Google Docs because it’s handy and its real-time collaboration feature that users can use through the web is pretty useful.
Scan Documents and Import Photos Easily from iPhone
This feature in Apple devices is one of the most useful features. The signing documents and importing documents and photos from iPhone can be useful for everyone. If you want to check which apps support this feature, make a right-click on any text section and find a nearby iPhone. In the lower section, you’ll see the list of apps that are supportable.
Run iPad and iPhone Apps on Mac
The latest-gen Mac M1 has opened several features for users. The new M1 MacBooks are quite powerful and can do some unique things that previous Macs weren’t able to do. The new M1 Macs can turn into an iPad and iPhone and can install games and apps too. If there’s an app that is only available for iPad and iPhone users, then you can use the following app on M1 Mac with ease. However, currently, a limited number of apps works perfectly with M1 Macs, but developers are working on it to make the apps run perfectly.
Conclusion
Launching Silicon M1 Mac is a big hit for Apple. Users around the world will now be able to explore their Mac even more. However, this is not the only change that happened in 2020, Apple also improved the security and app permissions features for users. Now without the user’s permission, apps won’t be able to track and access user’s data.
Source: Top Hidden Tricks that Every Mac User Should Know
Eva winget
posted a blog.
The new-gen iPhone lineup iPhone 12, iPhone Mini, iPhone 12 Pro and iPhone Max Pro are really impressive. From camera features to battery life of iPhone Mini to iPhone Pro Max, everything is top-notch. Every user loves something about the iPhone which makes them use it and explore it even more. Along with the new iPhone lineup, the new iOS 14 also has its unique features that users are admiring, but still, most of the users aren’t happy with its default settings. So if anyone is using iPhone 12 or above, they should change some of its default settings for better productivity and reliability.
Make Your iPhone 12 More Reliable by Changing These Settings Right Away
Turn of 5G Coverage if Networks Are Not Available
The iPhone 12 and above devices above it support 5G networks. The use of 5G networks is currently available in a few countries, but whoever doesn’t have 5G accessibility, they’ll have to wait a bit longer.
The new generation iPhone devices can switch between 4G and 5G networks according to the availability. It will automatically get connected and switch between from 4G to 5G network without notifying the user. Indeed, it’s a great feature, but it can cause draining battery faster and lowers the battery life as well. So if there’s no 5G network available, make sure to set the network to only 4G/LTE. To turn off 5G network on iPhone 12, follow SettingsCellularCellular Data OptionsVoice & Data and press LTE.
Change the Incoming Call Alert
In iOS 14, Apple changed the call alert system when the device is getting used. Now when using an iPhone device, the incoming call won’t display on the whole screen and will only display on the small notification section. Users can easily miss this incoming alert, so it is better to change it as it was before. To get incoming calls on full screen, follow – SettingsPhoneIncoming CallsFull Screen.
Display Full Notification on Lock Screen
The Face ID on iPhone 12 does not allow anyone to see alerts and notifications before unlocking the device. In iPhone 12, it’s a part of the user’s privacy that doesn’t allow anyone to check the notifications. Until the owner of iPhone 12 unlocks their device using Face ID or passcode, they can’t see the alerts and notifications. However, this can be annoying sometimes as well, so it’s better to make some changes on notifications on the lock screen.
Users can change notification alerts on the lock screen by going into SettingsNotificationsShow PreviewsAlways.
Try Out Fancy Wallpapers
The best way to make the home screen of the iPhone gorgeous is by changing its wallpaper. Apple has added a set of new wallpapers on iOS 14 that every user should try once to give their device’s display a whole new look. To change the wallpaper on the iPhone, users have to go into SettingsWallpaperChoose a new wallpaper. Choose wallpaper between Still or Live.
Activate Dark Mode
Dark Mode is undoubtedly a highly preferred feature on iPhone devices. If anyone doesn’t want to change anything on their display but still wants to feel fresh, Dark Mode is available for them. Dark Mode doesn’t work like changing wallpaper, but it turns the white background to black including the apps. Plus it saves battery, and the easiest way to activate it is – SettingsDisplay & BrightnessDark.
Add an Additional Face ID
The Face ID on new iPhone devices is way too accurate. It sees all different aspects and learns the structure of the user’s face with every scan. If the iPhone of any user doesn’t recognize them easily, then they should add an alternative Face ID.
To add another Face ID, move into SettingsFace ID & PasscodeEnter PINSet Up An Alternative Appearance.
Conclusion
iOS 14 has made several changes from the previous iOS version, and most of the changes are admired by users. The new feature of customizing the home screen is really amazing, and adding Find My app by removing Find Friends and Find My Device is also a smart move. Apple merged both Find Friends and Find My Device into Find My app, which is now easier to use.
Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.
Source: Make Your iPhone 12 More Reliable by Changing These Settings Right Away
Eva winget
posted a blog.
For the people who usually face a lot of trouble while using the keyboard with Mac, Apple has some incredible and useful Keyboard Accessibility features. Undoubtedly, the Keyboard Accessibility features make the whole working easier. If you enable the Keyboard Accessibility feature on your Mac, you can type things without actually typing on your keyboard. The process of enabling and assessing the Keyboard Accessibility feature is pretty simple. Here’s the full guide to access it.
How to Activate the Sticky Keys
Press on the Apple logo over the Menu bar.
Press System Preferences.
Tap Accessibility.
Tap on the Keyboard option.
Mark on the Enable Sticky Keys option.
Press Options near the Enable Sticky Keys.
Mark on each setting to disable/enable.
Press on the drop-down tab near the Display pressed keys on screen.
Press Location where the pressed buttons will appear.
How to Activate Slow Keys
Press on the Apple logo over the Menu bar.
Press System Preferences.
Tap Accessibility.
Tap on the Keyboard option.
Mark on the Enable Slow Keys option.
Press Options near Enable Slow Keys.
Mark on the boxes near Use click key sounds.
Press and move the slider to decrease or increase the key tap delay.
How to Activate Accessibility Keyboard
Press on the Apple logo over the Menu bar.
Press System Preferences.
Tap Accessibility.
Tap on the Keyboard option.
Press Accessibility Keyboard.
Mark on the checkbox to activate the on-screen Accessibility Keyboard.
Tap Panel Editor.
Hit Options.
How to Manage the Options for Accessibility Keyboard
Press on the Apple logo over the Menu bar.
Press System Preferences.
Tap Accessibility.
Tap on the Keyboard option.
Press Accessibility Keyboard.
Press Options.
Mark on the checkbox close to the Fade panel after inactivity.
Tap arrows to arrange the seconds.
Move the slider to adjust the keyboard fade.
Mark on the Play key sound to hear sound while pressing the keyboard.
Tap on Drop-down to adjust the keys to register when pressed.
Press Hot Corners.
Tap on the drop-down tab to choose the effect after enabling the Hot Corners.
How to Utilize the Panel Editor
Press on the Apple logo over the Menu bar.
Press System Preferences.
Tap Accessibility.
Tap on the Keyboard option.
Press the Accessibility Keyboard.
Tap Panel Editor…
Press Add Panel.
Tap Panel Type option.
Choose the panel type from the drop-down tab.
Hit the + button to choose a panel.
Type a name for the button.
Under the drop-down menu, choose the color, action, position and button size.
Type the spoken phrases and activate the following button.
By following all these different Keyboard Accessibility features, you can do something productive easily in a short time.
Conclusion
Mac is an incredible device, and if someone wishes to explore it or need to have proper experience of it, then always keep its macOS version up to date. Apple adds new features, updates, and fixes bugs if any feature is not working properly. However, the accessibility features mostly work perfectly, so users can try out these features anytime they want.
Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.
Source: https://a2directory.co.uk/blog/how-to-utilize-the-keyboard-accessibility-feature-on-mac/
Eva winget
posted a blog.
For gamers and live streamers, Discord is a complete gem which allows them to interact with their friends, and keep them in touch with all kinds of related content. Discord is not just a conversation platform, but it helps the streamers in their streaming session too. People are running a lot of huge channels on Discord where they share tricks, experience, guide, news and many different kinds of entertaining stuff.
Indeed, using and understanding Discord could be a tough deal, but after using it a few times, you can understand and use it as a basic level. Even if you’re a newbie and looking to begin a game to play, you can take guidance from that certain gaming channel on Discord. You’ll find plenty of useful information to make your gaming experience better. On the other hand, if you have Xbox One you can run Discord on it too. Connecting your Discord with Xbox One will allow you to be connected with your friends. So if you’re interested to know more about it, here’s how you can use Discord with Xbox One.
How to Use Discord with Xbox One
In order to use Discord with the Xbox One console, make sure to have the latest version of the Discord app.
Create an account on Discord.
In the Create an account section, enter your Email Address, Username and Password and press Continue to move further.
Under the Link Discord Account column, Press Link option.
Pressing down the Link option will allow you to link your Discord account with Xbox One.
Just open the Gamertag section at the upper left side of the screen.
There in the Settings section, you’ll need to press on the Settings and link your account using the account password.
Once the accounts are linked together.
Start the Discord app.
Move into the Settings section of your Discord app or website version.
Move into the Connections sections and press Add option.
Type the PIN for Xbox account authentication.
Once you type the PIN correctly, your Xbox One and Discord will get linked successfully.
Just after linking your Discord account with Xbox One, you’ll see some improvements in the app. Your friends that were added on Xbox One console will appear on Discord as well. There you can interact with them and can also invite them to play together. Instead of texting, you can call them over the internet in a clear voice.
PC gamers mostly use Discord to make their gaming session better. Additionally, those who spend a lot of time in streaming can create their channel on Discord with separate rooms. You add an invitation link to your Discord channels with others or can simply provide it at the streaming session. Those who are interested in your streaming session will join your channel and will get notified whenever you start streaming.
However, Discord doesn’t just notify users, but it can also provide essential items like coordinates, important items, gaming guide and many more things that can be helpful for a beginner.
Conclusion
Those who are plenty of friends on Xbox One, they can really rely on Discord to make their connection strong. Linking Discord account with Xbox One doesn’t take more than 5 minutes, but it provides a lot of great features that a user can’t access individually on Xbox One console.
Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.
Source: How to Use Discord on Xbox One
Eva winget
posted a blog.
Creating customized Emoji is a trend nowadays. People nowadays are building their own avatar and creating custom emojis out of it. Well, custom emojis are a bit different from default emojis. Custom emojis are based on their creator’s expressions, while the default emojis are just common. In this digital era, the use of emojis has reached its peak.
Now to make the emoji game a little stronger, many companies have provided their users a chance to create their own emojis using new items and characters. To create custom emoji, users don’t have to download any additional apps. Custom emojis can also be used in the place of stickers. It improves the communication experience and takes less time to find.
Gboard
Gboard is Google’s keyboard that allows the user to create their preferred emoji. Gboard is available for both Android and iOS, but Android users get some additional emoji creation features.
To create emoji, click the emoji button first and choose the type of emoji you want to create. You’ll get a few suggestions to choose the right emoji. These emojis will be very different from default emojis.
The great thing about the custom emoji is that it can be used on almost every app. Along with the emoji, users can also customize stickers similar to Memoji on iOS. To do this press the Sticker icon above the keyboard and press the Add option and choose Minis to let Gboard take your photo and convert it into a cartoon.
iMessage
The app encouraged a lot of companies to focus on custom emoji and Memoji. Since the launch of the custom emoji and memoji feature, the number of emoji and memoji users has increased a lot. Memoji is more like cartoon stickers that are based on the user’s face.
In iMessage, there’s both sticker and emoji features which provide a variety of pictures and shapes into the conversation. After clicking a picture in iMessage, users can edit it just like an emoji and can also create a short video for more fun.
Facebook Messenger
Well, users can’t add a custom on Facebook Messenger but can apply a reaction emoji on the messages. By holding on to a text message, a list of emojis will pop up. Users can select any of the available emojis to give their reaction on the particular message.
Users can also change the default thumbs-up emoji. To do this, users have to press i icon in a conversation and open the Emoji section. In the following section, users can choose a new default emoji in the place of thumbs up. Using emoji in a chat box makes the conversation easier to understand. It helps both users to understand each other’s mood and their way of telling things.
Source: How to Create and Use Custom Emoji
Eva winget
posted a blog.
After connecting Samsung’s Smart TV with Alexa, it becomes easy to access the TV. People who are using Samsung Smart TV from the year 2018 or above can access it simply by voice commands. There are a couple of apps that a user needs to install to start the voice commanding feature in their old Smart TV. Once the voice command feature is activated, users will be able to use turn up/turn down, power on/off and few more useful features.
Luckily, if anyone is using Samsung Q60t QLED TV which launched in 2020, their TV has got built-in Alexa. So in this Samsung Smart TV, users don’t need to attach a smart speaker, because built-in Alexa can hear all voice commands, do voice interactions, change channels, search for shows and movies, start the music and many more things. But if anyone doesn’t have a new Samsung Smart TV and is willing to add Alexa, then they need to follow the right procedure.
How to Connect Samsung Smart TV with Alexa
Set Up the Device
The first thing every user must do is set up both Samsung Smart TV and Alexa and start functioning. Once the setup of both devices is complete, connect them with a common Wi-Fi.
Ready the Apps
The next thing a user needs to do is get their smartphone ready to coordinate with both of the devices. Download the Amazon Alexa and Samsung SmartThings application on smartphones. It is available for both iOS and Android devices. Sign in both Samsung and Alexa apps with the same account.
Search the TV in SmartThings Application
Find the Samsung Smart TV in Samsung SmartThings application and connect your smart TV. It will allow the user to connect with the Alexa speaker easily, and to do this, go to the Device section first. Choose the Add Device option. Turn on the TV to find the device quickly.
Pair the smartphone with Samsung Smart TV, and toggle on to enable the TV to utilize it as a smart device.
Find Smart Speaker in Alexa Application
Once the Samsung Smart TV is found and paired with the smartphone, users have to search for Alexa too. Whatever the device user is planning to connect with Smart TV must find the device in Samsung SmartThings first and pair it with the smartphone.
Connect the Applications
Once the Alexa app is found and linked with the smartphone, activate the Samsung SmartThings skill and log in with the same Samsung account to link both accounts.
Choose Your TV in Alexa Application
After enabling the Samsung SmartThings, the Alexa will automatically get paired with smart TV and that’s all a user has to do.
Conclusion
The usage of smart assistants like Alexa, Google and Siri is just increasing day by day. Companies are offering new and unique features for users to try out the assistant features and find their benefits. Indeed, smart assistants like Alexa are pretty smart and can access a lot of things by just a simple command. But before using these assistants, users must know how much these assistants are capable of and the right way to use assistants.
Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.
Source: How to Connect Samsung Smart TV with Alexa